September 2017 ~ osha found

COURSE TRAINING

Confined Space, Working Safely at Height and Scaffolding Training, we cover the theoretical and practical training in their dangers, and familiarization with the use and application of the specific teaching facilities and equipment
COURSE TRAINING

Fire Safety and Fire Fighting Training. From office fire safety to Emergency Response Team training for large industrial fires, there is no substitute for practical experience in dealing with live fire. We use specialist live fire training facilities to incorporate extensive practical fire scenarios with background theory and discussions to ensure that trainees are as prepared as possible for the fires they may encounter.
COURSE TRAINING

We provide delegates with the knowledge, skill and confidence to operate an onshore - offshore crane and forklift safely reducing the possibility of injury and accidents to personnel and damage to property. We provide also the delegate with knowledge of the general hazards and risks of lifting and rigging operations, an awareness of relevant legislation and regulation, and an opportunity to practice lifting and rigging operations
COURSE TRAINING

conducts fully accredited specialized drilling training courses for qualified drillers, supervisors and new entrants to the drilling industry. Our courses are run by experienced, registered and accredited driller Trainers and all training is conducted using a state of the art drilling simulator with hard panel controls. We conduct the levels 2, 3 and 4 Training Courses. Accredited with Scotland, we can issue competence certificates directly to the successful course delegate.

25506

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
HUSSEIN QASSEM SABER	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25505

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
MUHAMMAD ADNAN JASSIM	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25504

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
SAJJAD AHMED MARWAH	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25503

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
NATIQ FADHEL JABER	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25499

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
NAWAR IMAD SAEED	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25496

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
AHMED HAMED SUKAR	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25494

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
ABBAS THAJIL SAJIT	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

25490

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
AHMED MAJID KARIM	NAME STUDENT
30 HRS	TIME
2 YRS	Certificate Validity
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment – PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

about us

Disclaimer

Disclaimer
This material is for training purposes only to inform the reader of occupational safety and health best practices and general compliance requirement and is not a substitute for provisions of the OSH Act of 1970 or any governmental regulatory agency Osha Foundation Organization NGO Occupational Safety and Health Training For In The Industrial And Construction Sectors .and is not connected or affiliated with the U.SDepartment of Labor ( DOL) or the Occupational Safety and Health Administration (OSHA). and Others ..