Program Safety Physical Health Hazards in Construction Training

  top ten risks and hazards from working on construction sites are:

• Working at height.
• Moving objects.
• Slips, trips, and falls.
• Noise.
• Hand arm vibration syndrome.
• Material and manual handling.
• Collapsing trenches.
• Asbestos.

Construction workers are exposed to a variety of health hazards every day. These men and women have the potential for becoming sick, ill, and disabled for life.

This course discusses the physical health hazards construction workers may find, such as exposure to silica, asbestos, hazardous chemicals, excessive noise, and extreme temperatures.

We will also take a closer look at ways to protect yourself from these hazards on a construction site.

Modules and Learning Objectives

Click on the blue links below to access the modules. You can also click on the links at the top of the page. By the end of the course, you should be able to accomplish each of the learning objectives listed in each module.

  Risk Factors and Hazards

Learning objectives in this module include:

• Describe the major risk factors related to health in construction work.
• Describe the construction occupations and associated hazards.
• Discuss the typical chemical hazards present on a construction site.
• Define and give examples of acute and chronic health effects of exposure to hazardous chemicals.
• Discuss the hazards and control methods when exposed to asbestos, silica and lead.
• Describe the health hazards associated with working in confined spaces on construction sites.

  Environmental and Ergonomics Hazards

Learning objectives in this module include:

• Discuss the effects of, and protective measures for exposure to excessive noise.
• Describe the difference between hand and whole-body vibration, and effects of overexposure to each.
• Discuss the hazards associated with heat and cold stress, and the ways to reduce the effects of overexposure.
• Define, give examples, and describe protective measure for exposure to ionizing and non-ionizing radiation.

Share:

Read More

Program Electrical Safety for Employees: Basic Training

Electrical safety basics

Don't work with exposed conductors carrying 50 volts or more. Make sure electrical equipment is properly connected, grounded and in good working order. Extension cords may not be used as permanent wiring and should be removed after temporary use for an activity or event.

  essential to modern life, both at home and on the job. Some employees — engineers, electricians, electronic technicians, and power line workers, among them - work with electricity directly. Others, such as office workers and sales people, work with it indirectly. Perhaps because it has become such a familiar part of our daily life, many of us don't give much thought to how much our work depends on a reliable source of electricity. More importantly, we tend to overlook the hazards electricity poses and fail to treat it with the respect it deserves.

  standards cover many electrical hazards in many different industries.  general industry electrical safety standards are published in:

•   Design Safety Standards for Electrical Systems, 
•   Electrical Safety-Related Work Practices Standards.

  also has electrical safety standards for 

• Construction - Subpart  .
• Marine terminals reference the general industry electrical standards in Subpart .
• Shipyard standards   cover limited electrical safety work practices  .

  

Share:

Read More

Program Introduction to Safety Accountability Training

                  Safety Accountability

Does this picture show an unsafe practice? Yes!accountability ranks right at the top with management commitment as a critical element in a company's safety and health management system. Accountability is one of the answers to the question, "why do we behave the way we do in the workplace?" Consequences. So, we must understand what it is and how it should work as part of the safety management system.

Management may impose all kinds of safety policies, programs, written plans, directives, rules, and training on the workforce. Still, as you'll soon learn, none of that effort will matter unless the appropriate application of effective consequences within a culture of accountability exists: only then will desired behaviors be sustained. After all, employees must believe they are going to be held accountable for the decisions they make and the actions they take, or you can be sure that any safety management effort is ultimately doomed to failure.

Share:

Read More

Program Introduction to Safety Supervision Training

                                                                         Supervisors  

The supervisor is the one person who can take immediate, direct action to make sure that his or her work area is safe and healthful for all employees. Russell DeReamer, author of Modern Safety Practices, considers the supervisor the only person who can control employees, machines, and working conditions on a daily, full-time basis.

Just count your STARS to be an excellent supervisor!

The "FIVE STARS" Safety Supervision Model

This course introduces you to key elements that help supervisors demonstrate the "5-STARS" of safety supervision. The key 5-STARS of safety supervision and leadership are:

• Supervision - overseeing work activities to make sure employees are safe.
• Training - conducting safety education and training.
• Accountability - insisting everyone complies with company safety policies and rules.
• Resources - providing physical resources (tools, equipment, materials, etc.) so employees can work safely.
• Support - creating a supportive and psychosocial work environment (schedules, workloads, recognition, etc.) so employee do not work under undue stress.

Share:

Read More

Program Personal Protective Equipment: Basic Training

                                                                                                                    Introduction

Common types of PPE.

When elimination, substitution, engineering, and administrative controls are not feasible or do not provide sufficient protection, employers must provide personal protective equipment (PPE) to their employees and ensure its use. Personal protective equipment, commonly referred to as "PPE", is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs), hard hats, respirators and full body suits. Remember, PPE is the last resort in hazard control, not the first choice. Some employers may mistakenly believe PPE is the end-all be-all. They might do too much, not too little.

Share:

Read More

Program Emergency Action and Fire Prevention Plans Training

                                      INTRODUCTION

Types of Workplace Emergencies
(Click to enlarge)

Several Occupational Safety and Health Administration   standards explicitly require employers to have Emergency Action Plans (EAPs) for their workplaces. Emergency preparedness is a well-known concept in protecting workers' safety and health. To help employers, safety and health professionals, training directors, and others, the   requirements for emergencies are compiled and summarized in this course.

Fire safety becomes everyone's job at a worksite. Employers must develop Fire Prevention Plans (FPPs) and train workers about fire hazards in the workplace and what to do in a fire emergency. If you want your workers to evacuate, you should train them on how to escape. If you expect your workers to use firefighting equipment, you must give them appropriate equipment and train them to use the equipment safely.

The EAP and FPP, along with the Preventing Workplace Violence , should all be combined into an overall Emergency Preparedness Program to protect employees and help ensure continuity of the organization's business services.

This short course provides an overview  standards for emergencies contained within . It is not intended to alter or determine compliance responsibilities in  standards or the Occupational Safety and Health Act of   Please review the current standards applicable to your work operations to ensure your compliance.

Share:

Read More

Introduction Program Training

                                                                        Introduction

More than 30 million workers are potentially exposed to one or more chemical hazards in the workplace. There are  existing hazardous chemical products and hundreds of new ones are being introduced annually. This poses a serious challenge for employers as well as a health and safety hazard for exposed employees. 

  Top   e will discuss  Hazard Communication Standard and how employees can protect themselves from the dangers of hazardous chemicals in their work environment.

Share:

Read More

335544

 

INFORMATION CERTIFICATE COURSE
Project management Professional	COURSE
SALAM FAHAD HURRY MANSOR	NAME STUDENT
20 HRS	TIME
·         Topics Covered in this Training Included:Introduction to Project management Professional Project Initiating-Planning-Executing-Monitoring & Controlling-Closing-Project Scope management-Project Risk Management-Project Quality Management-Project Cost Management-Project Time Management-Project Integration Management-Project Human Resource Management-Project Communications Management-Project Procurement Management-Professional and Social Responsibility.	TOPIC COVERS COURSE

Share:

Read More

5989

5989 

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
AHMED KHALAF HUSSEIN	NAME STUDENT
30 HRS	TIME
Dec -2020	ISSUE DATE
IRAQ	REGION STUDENT
Topics Covered in this Training Included (30 - hours) : Introduction to OSHA  and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment –  PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials –  Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out  ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

Share: 

Share:

Read More

123

 141230

Share:

Read More

202105

OSHAFOUNDATION

Confined Space Program

Has Successfully Completed all Academic Requirement In This                                          (20 – Hours) Confined Space Program Course of Study Presented by Osha Foundation for Comprehensive Development.

Topics Covered in this Training Included (20 - hours) : Basic Requirements of OSHA Standard 29 CFR - Permit-Required Confined Spaces  Categories of Confined Spaces - Confined Space Program Components - Atmospheric Hazards - Not-Atmospheric Hazards Controlling Hazards Duties and Responsibilities of the Confined Space Entry Team - Confined Space Rescue - Confined Space Training and Drill

Share:

Read More

111

 ][LKJHUGYFTDRFTGYHUJK

Share:

Read More

24412

 

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
SARMAD ABDULRAHIM ABDULKARIM	NAME STUDENT
30 HRS	TIME
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA  and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment –  PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out  ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

Share:

Read More

23552

 

INFORMATION CERTIFICATE COURSE
Computer Operator Programs	COURSE
SALAM FAHAD HURRY MANSOR	NAME STUDENT
20 HRS	TIME
Topics Covered in this Training Included:Introduction to Microsoft Office .Page Layout -Tab Orientation- Margins- Size- Fonts Group- Edit Drag/Drop- Copy Paste- Delete- Spell Fix- Grammar- Paragraph Group- Align- Spacing- Indent- Show/Hide- View Tab Page Layout- Ruler- Zoom- Review Tab- Thesaurus- File Tab- Save/Save As- Print – Excel Page Layout- Orientation- Margins- Size- Fonts Group- Edit Drag/Drop- Copy Paste- Delete- Spell Check- Alignment Group Cells- Rows- Columns View Tab- Normal- Zoom- Column Format- Width- Height- Cell Entry line- Sheets- Name sheets- Reorder Sheets- Review Tab- Thesaurus- Simple Sort-Auto Sum Column and Row –PowerPoint- Common functions- Insert slide- Insert Task Box	TOPIC COVERS COURSE

Share:

Read More

24420

 

INFORMATION CERTIFICATE COURSE
General Industry Safety and Health	COURSE
AHMED NOORI SADDAM	NAME STUDENT
30 HRS	TIME
Topics Covered in this Training Included (30 – hour) : Introduction to OSHA  and Safety Regulation (2h) Safety and Health Management Program (2h) Waking and Working Surfaces(3h) Exit Routes, Emergency Action Plans and Fire Protection Plans (3h) Electrical Safety (2h) Personal Protective Equipment –  PPE (2h) Hazard Communication – Haz Com (2h) Material Handling (3h) Powered Industrial Trucks (1h) Ergonomics (1h) Hazardous Materials – Flammable / Combustible (1h) Permit Required Confined Space (1h) Hazardous Energy Control – Lockout / Tag out  ( LOTO ) (1h) Machine Grinding (1h) Welding and Cutting (2h) Introduction to Industrial Hygiene (1h) Bloodbome Pathogens(1h) and Fall Protections(1h)	TOPIC COVERS COURSE

Share:

Read More